The maintenance method of metal leg

Table leg refers to the bracket at the bottom of the table, can ensure the balance and stability of the table, and can bear a certain weight of the metal table foot. The use scope of mensal foot is wider and wider, its cost is low, practical life is long, the advantage such as saving a space also will make its get highly respected.

According to material classification: cast iron table foot, stainless steel table foot, cast aluminum table foot, electroplated table foot.

Press modelling classification: fold table foot, circular table foot, square table foot, elliptic table foot, horn shape table foot.

Maintenance :(1) do not place for a long time in the damp, greasy, chemical substances in the environment.

(2) Handle with care and be careful of collision when moving.

(3) The surface can be wiped with a wet towel and dried.

(4) After mopping the floor, the water mark on the surface of the steel pipe must be wiped dry with a dry cloth, and then sprayed with car wax or sewing machine oil maintenance.

(5) Usually all kinds of steel pipe table legs stained with oil, can be wiped clean with dry cloth, pay attention to the appearance of scratch phenomenon; Do not scrub the surface of steel pipe with rough and sharp materials, especially with soft cloth that is not easy to fall off.

(6) Steel pipe surface dust and easy to remove dirt can be washed with soap and weak washing, binder ingredients, using alcohol or organic solvents (ether, benzene) scrub; If the surface of the steel pipe is attached with bleach agent and various acids, wash it with water immediately, then soak it with ammonia solution or neutral carbonated soda solution, wash it with neutral detergent or warm water, wipe it dry and spray wax for maintenance.