Booth office desk material introduction-two

(2) the combination of other seats can be installed in the same way, the bracket arm hanging in the middle of the clip, which requires installation and bracket size, otherwise the bracket can not be installed correctly, table installation will also be affected.

(3) if there is a steel leg, it can be used to support the desktop, look at the other side of the desktop ahead of time, usually, the reserved mounting bracket will have a hole, oneself on the keyboard stand and hole position, then use a screw, after fixation after the installation is complete, the workbench panel on the support arm booth, then tighten the screws should be fixed, and then promote activities ark and main frame to complete the whole process.

Two, card table material introduction:

1. Wood-based panel;

(1) The material of the desktop is relatively large. From the perspective of material characteristics, there are usually wood-based panels based on medium density board, and the surface of the front and back is pressed against the natural finishes, usually 20-60mm thick, which is also good load-bearing capacity.

(2) Then apply multiple layers of paint evenly on its surface, which can not only beautify the desktop of the deck desktop, but also add a protective layer for it, so that it has a certain self-maintenance ability.

2. Solid wood;

(1) If the boss pays more attention to quality, the general use of solid wood, the price is naturally as high as imagined, mainly the use of particleboard as the substrate, its front and back surface pressure on a layer of melamine paper.

(2) The surface of the melamine board is a layer of paper, which can be designed in countless colors and printed in form to add new elements to the office decoration.

I hope the above introduction can help you choose the right desk for your company.