How to disassemble office desk

A lot of big companies have a lot of employees and it's essential to have a desk, so how do you install it?

Tools and materials required: Phillips screwdriver and a desk.

Method/procedure: First check whether the desk is complete, no damage, no scratches. Keep relevant records to prevent confusion of subsequent responsibilities. Look at the desk installation drawings for structure and installation sequence indicated on the drawings.

Table board edge sealing, according to the length of the table board around, the four edge sealing strips at both ends sawed into 45° bevel Angle, and ensure the length of the size, and then respectively coated, with a headless or flat head round nail in the table board around, the adhesive surface and bevel joints are required to close seam.

Covering line, the table board below the four border slats at both ends also saw into a 45° bevel, and ensure the length of the size, and then nail the table board below the four sides.

Machining molding edge, milling in the milling machine to meet the requirements of the drawing surface; Trim and polish the whole surface with wood and sandpaper to meet the requirements of surface quality.

Single piece, the two foot materials and a watchplate parts into a single piece; Assemble the foot frame, assemble two single pieces and two watchplates to form a complete foot frame, and then install the plug Angle.

Place the top board underside up on the work surface and use wood screws to connect the footstand to the top board to form a complete table.

The office booth mainly has two people, four people, six people, etc., the partition between the booth is currently using steel plate or glass and steel plate structure, the connection between the partition and the desktop, are connected by fixed slots, fixed nuts, three-in-one locks and other accessories. If you want to take it down, one is to see the parts of the joint, find the corresponding screwdriver for disassembly; Two is to use qiao jin, it is suggested that a person disassembly, a person in the auxiliary, to prevent the partition fall wounding; Three is in the process of disassembly to pay attention to the relevant network cables, data lines, so as not to cause damage.

Note: The screws must be tightened in the right order. Avoid touching your fingers.