Solve And Replace Problems in The Seismic Support in Time

The configuration of the seismic support directly affects the stress distribution and size of the piping system. Its performance and reasonable bearing capacity directly affect the service life and safe operation of the pipeline. There may be some problems in the design and installation of the seismic support. In addition, after a period of operation, the shape and position of the pipeline and the performance of the springs and other components of the support and hanger may change to a certain extent, resulting in damage to the support and hanger, overload, underload and displacement hindered, resulting in partial area of the pipeline. The stress increases and the thrust to the end point increases. The emergence of these problems will inevitably affect the safety and economy of equipment operation. When the anti-seismic support is installed, the horizontal plane is not flat, the installation has an inclination angle, the spring working tension is vertical, and it is invalid to directly support the indicator board. One of the reasons for the failure of pipeline protection and variable force rigid supports and hangers is the pressure test during the original factory production process to solve and replace the problems in time, and make appropriate adjustments according to the site conditions during the installation process.